Products

3-wire connection cable for microinverters for connecting the microinverter and the house line. The ending is always delivered open. This means that the cable can be routed flexibly and the desired end can also be mounted with, for example, the Schuko plug, Wieland plug or the permanent connection. The cables have the following properties for outdoor laying and long-term exposure to weather and temperature Protection from water Protection from light Protection from cold/heat Can be laid underground You need one cable for each inverter. The connection cables with battery plugs are suitable for inverters from Hoymiles and Envertech and other manufacturers. We supply the AP Systems extension cables with original Wieland plug connections for connection to the AP Systems inverters. The 1m connection cable from AP-Systems is part of the offer. Scope of delivery: Cable in the desired length (5m, 10m, 20m), ready crimped One side with mounted battery or Wieland plug, other side open for AP-Systems cable 1m AP-Systems connection cable with Wieland plug Complementary products: Schuko plug Inverter Open questions? Call us (02761/ 606 91 57) FAQ with the most important questions and answers Blog posts on the topic of balcony power plants

Read more less

The AP Systems AC connection cable is used to connect AP Systems inverters such as DS3-S, YC600, QS1 or QT2. The wire cross section is 2mm². One end contains the compatible flat connector for connection to the inverter. The other side can be freely assigned, e.g. with a Wieland plug, Schuko plug or other three-pin connectors. The assignment of phase, neutral and earth are clearly marked. Scope of delivery: Connection cable 1m Complementary products: Inverter Inverter connection cable Open questions? Call Call us (02761/ 606 91 57) FAQ with the most important questions and answers Blog posts on the subject of balcony power plants Search terms: ap systems DS3, AP Systems DS3S

Read more less

The AP Systems DS3-L is the latest generation of microinverters for the operation of balcony power plants, guerrilla PV or mini PV systems with two solar modules. The module output can be up to 450 watts. An efficiency of 97% ensures the highest electricity yields. With a maximum output power of 730VA, power-consuming devices are supplied directly with the self-generated power from the socket. Overproduced electricity flows into the public power grid and, as long as you still have an old three-phase meter, causes it to run slower or backwards. Click here for the technical data sheet , for declaration of conformity , certificate for NA protection and installation manual Advantages APSystems DS3-L: high reliability and long service life (10 year guarantee in compliance with the APSystems guarantee conditions) high efficiency of 97% for the highest effectiveness very good price/performance ratio Two independent inputs process the electricity separately for each solar module Up to two modules can be connected Recommended power of up to 450 watts per module input Input voltage range 25 - 55 V DC (suitable for solar modules with 60 or 72 cells) The inverter is fully certified according to VDE 4105. You do not need any external NA protection to operate compliantly. Easy installation via Plug&Play: MC-4 plug on the DC side Passive cooling through rib construction IP 67 dust and waterproof Scope of delivery: 1 x APSystems DS3-L Connection cable 1m data sheet Complementary products: Inverter connection cable Cylinder head screw for attaching the inverter Schuko plug Wieland plug Open questions? Call Call us (02761/ 606 91 57) FAQ with the most important questions and answers Blog posts on the subject of balcony power plants Search terms: ap systems DS3, AP Systems DS3L

Read more less

The AP Systems DS3-S is the latest generation of microinverters for the operation of balcony power plants, guerrilla PV or mini PV systems with two solar modules. The module output can be up to 450 watts. An efficiency of 97% ensures the highest electricity yields. With a maximum output power of 600VA, power-consuming devices are supplied directly with the self-generated power from the socket. Legal conformity in Germany is ensured by the 600 watts of active power (nominal power at nominal conditions). Overproduced electricity flows into the public power grid and, as long as you still have an old three-phase meter, causes it to run slower or backwards. Click here for the technical data sheet , for declaration of conformity , certificate for NA protection and installation manual Advantages APSystems DS3-S: high reliability and long service life (10 year guarantee in compliance with the APSystems guarantee conditions) high efficiency of 97% for the highest effectiveness very good price/performance ratio Two independent inputs process the electricity separately for each solar module Up to two modules can be connected Recommended power of up to 450 watts per module input Input voltage range 25 - 55 V DC (suitable for solar modules with 60 or 72 cells) The inverter is fully certified according to VDE 4105. You do not need any external NA protection to operate compliantly. Easy installation via Plug&Play: MC-4 plug on the DC side Passive cooling through rib construction IP 67 dust and waterproof Scope of delivery: 1 x APSystems DS3-S Connection cable 1m data sheet Complementary products: Inverter connection cable Cylinder head screw for attaching the inverter Schuko plug Wieland plug Open questions? Call Call us (02761/ 606 91 57) FAQ with the most important questions and answers Blog posts on the subject of balcony power plants Search terms: ap systems DS3, AP Systems DS3S

Read more less

The AP Systems communication unit ECU-B shows you the performance data of your solar power system around the clock. Statistics are not neglected and you generate valuable information about how and when you produce the most electricity. Among other things, you will receive performance data Current energy production Energy production per month Energy production per year Energy production throughout the entire term The communication unit gives you the opportunity to monitor up to 4 solar modules via ZigBee (wireless) . The communication unit is connected to your router via WiFi. In addition to the performance data, the AP Systems communication unit is also used for important firmware updates and extends your inverter warranty from 2 to 10 years with full registration. The ECU-B can also be used to bring about important legal changes, e.g. an update of the inverter from 600 watts to 800 watts AP systems (as soon as the law is passed and not before) After successful connection, monitoring takes place directly in the online portal or the app on the smartphone. You can find the data sheet here and the installation instructions here. Alternatively, see the blog post on setting up the ECU-B communication unit. Supported panels: 4 Communication: ZigBee Security: WEP, WPA2-PSK Weight: 150 grams Installation location: indoor Scope of delivery: AP Systems communication unit Complementary products: AP Systems DS3-S inverter Inverter connection cable Open questions? Call Call us (02761/ 606 91 57) FAQ with the most important questions and answers Blog posts on the subject of balcony power plants

Read more less

The standard-compliant connection for mini PV and balcony power plants. In addition to the Wieland feed-in socket, a standard-compliant connection can also be ensured by permanently installing it on your house connection. For example, fixed installation via luster terminals or installation terminals is suitable for this. Alternatively, the Spelsberg surface-mounted box can also be equipped with the Wieland socket part scope of delivery 1 x surface-mounted frame with cover IP54 Complementary products: Wieland socket Schuko plug Wieland plug Open questions? Call Call us (02761/ 606 91 57) FAQ with the most important questions and answers Blog posts on the subject of balcony power plants

Read more less

Mounting triangle elevation 20° - 40° made of solid aluminum. The inclination of the modules can be flexibly adjusted. In order to always achieve the highest power yield, the angle of inclination is adjusted to an ideal 32° in summer and to a maximum inclination of 40° in winter. The individual mounting triangle is only used to supplement a complete set of flat roof mountings. Further parts for the finished assembly stand are - Profile rails - Mounting plate including hammer head screw - End clamps & middle clamps Assembly: Two support triangles are required to attach a module. Three support triangles are required to attach two modules in a row. View our assembly instructions here. To ensure safe installation, the assembly must be weighed down or firmly anchored. The support triangles can be weighted down with stone slabs or curbs without drilling. Scope of delivery: 1 x elevation triangle Complementary products: Complete set for flat roof mounting profile rail Mounting plate End clamps Middle clamps Slide-in connector End cap Open questions? Call Call us (02761/ 606 91 57) FAQ with the most important questions and answers Blog posts on the subject of balcony power plants

Read more less