””

Code "Spring" - Save 25€ on all balcony power plants - only for a short time!!

Mounting set elevation 20° - 40° flat roof

Description

Elevation balcony power plant flat roof

The solar elevation 20° - 40° mounting set consists of solid elevation triangles. The inclination of the modules can be flexibly adjusted between 20° and 40°. In order to always achieve the highest power yield, the tilt angle is adjusted to a flat 20° in summer and to a maximum tilt of 40° in winter. We wish you a good solar harvest. In just a few simple steps you can become a power generator, take a look at our assembly instructions . Find our assembly video here.

The set is suitable for modules with a width of up to 115cm

Assembly:

Two support triangles are required to attach a module. Three support triangles are required to attach two modules in a row. View our assembly instructions here.

Additional required mounting material in the form of profile rails, fastening screws, middle and end clamps, and covers are part of the offer.

To ensure safe installation, the assembly must be weighed down or firmly anchored. The support triangles can be weighted down with stone slabs or curbs without drilling.

Our basic flat roof installation set provides for vertical installation (ie in portrait orientation). If you want to mount your modules horizontally, i.e. across (landscape), you will need longer profile rails. Call us or send us an email with your request and we will send you an offer.

Scope of delivery:

  • Assembly triangles
  • Profile rails in 1.20m length
  • Mounting plate
  • End caps
  • End clamps & if necessary middle clamps

Additional Information:

Search terms: mounting set for elevation 20 40 flat roof,

Mounting set elevation 20° - 40° flat roof

Product form

Free pickup in our shop(s)

$160.18$154.65 Incl. VAT

Description

Elevation balcony power plant flat roof

The solar elevation 20° - 40° mounting set consists of solid elevation triangles. The inclination of the modules can be flexibly adjusted between 20° and 40°. In order to always achieve the highest power yield, the tilt angle is adjusted to a flat 20° in summer and to a maximum tilt of 40° in winter. We wish you a good solar harvest. In just a few simple steps you can become a power generator, take a look at our assembly instructions . Find our assembly video here.

The set is suitable for modules with a width of up to 115cm

Assembly:

Two support triangles are required to attach a module. Three support triangles are required to attach two modules in a row. View our assembly instructions here.

Additional required mounting material in the form of profile rails, fastening screws, middle and end clamps, and covers are part of the offer.

To ensure safe installation, the assembly must be weighed down or firmly anchored. The support triangles can be weighted down with stone slabs or curbs without drilling.

Our basic flat roof installation set provides for vertical installation (ie in portrait orientation). If you want to mount your modules horizontally, i.e. across (landscape), you will need longer profile rails. Call us or send us an email with your request and we will send you an offer.

Scope of delivery:

  • Assembly triangles
  • Profile rails in 1.20m length
  • Mounting plate
  • End caps
  • End clamps & if necessary middle clamps

Additional Information:

Search terms: mounting set for elevation 20 40 flat roof,

Customer Reviews

Based on 62 reviews
79%
(49)
13%
(8)
5%
(3)
2%
(1)
2%
(1)
D
Dr.Axel R.
Solides Gestell

Prima gelaufen

K
Karl -.E.R.
Schnell und komplett

Die Lieferung erfolgte schnell und unkomliziert. Die Verpackung war leicht ramponiert, aber alle Teile komplett. Für die Verbindung zwischen den beiden Modulen war keine Sicherung vorbereitet. Vorgefertigte Löcher in den Schienen und Verbindern mit entsprechenden Schrauben wären eine sinnvolle Ergänzung des Sets für zwei Module.
Sonst alles tippi toppi!

D
D.G.
Alles gut, aber es könnte noch besser sein

Wenn man an dem ausziehbaren Ständer Markierungen anbringen würde, die den Neigungswinkel anzeigen, wäre das System noch optimaler....

D
Dietrich G.
Alles gut, aber es könnte noch besser sein

Wenn man an dem ausziehbaren Ständer Markierungen anbringen würde, die den Neigungswinkel anzeigen, wäre das System noch optimaler....

H
Hans W.

alles Bestens

Login

Forgot your password?

Don't have an account yet?
Create account